Screw in plug to suit Respons, Hybrid & Deceptor Pro to block off either the Recirc Port or the Vent Port

Hose Plug Bung to block of recirc hoses.

Available in:

20mm

25mm

30mm

33mm

Mach 2 Atmosphere Upgrade Kit to convert all GFB Mach 2 from Recirculating to Atmosphere Venting BOV

Kit Contains:

Trumpet

Spring

Plug

The sizes below are for the hose plug all trumpets and springs in this kit are the same size.

There is a harder spring supplied in this kit, as the valve to remain closed at idle when venting to atmosphere. This prevents from stalling and backfiring

The 5702 can be used in place of the standard trumpet on all GFB Valves, and will make the whistling sound more readily than the 5701 (High boost and RPM is required to get the whistle from a 5701), and at a slightly higher pitch. Like the 5701 however, it is necessary to run the valve so that all (or most) of the air vents through the trumpet - Respons valve will not typically not generate the velocity required to whistle when set to 50/50 venting.

This part is recommended for Respons and Deceptor Pro II EXCLUDING T9003 & T9503

5701 High Boost 17psi or more

5702 Low Boost up to 16psi

Standard Replacement Trumpet for all GFB Respons, Deceptor Pro, Hybrid, Mach 2

Standard Replacement Bases

These Bases are to fit the following

Hybrid:

T9207, T9220, T9225, T9233, T9235

Mach 2:

T9107, T9120, T9125, T9133, T9135

Respons:

T9020, T9025, T9033, T9035

Deceptor Pro

T9520, T9525, T9533, T9535

Standard Replacement Recirc Outlet Adaptors

These Recirc Outlets are to fit the following

Hybrid:

T9207, T9220, T9225, T9233, T9235

Mach 2:

T9107, T9120, T9125, T9133, T9135

Respons:

T9020, T9025, T9033, T9035

Deceptor Pro

T9520, T9525, T9533, T9535