Walbro FRB-2-1 Reciprocating Fuel Pump - 24V
Walbro FRB-Series Fuel Pumps are the perfect choice where battery life, low noise, and best durability are important, and where fuel quality is questionable.
The Walbro FRB-2 Fuel Pump supercedes the Walbro 6067-1 Fuel Pump, which is discontinued.
All Walbro Marine and Industrial Fuel Pumps Feature:
- Low Current Draw
- Reverse-Polarity Protected up to 60 minutes
- Self-Priming (Dry Lift) of more than 48" (120 cm)
- Dry Run to Four Hours
- Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
- Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
- Protection from Transient Voltages to 100 vdc
- US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
- European CE Standard Approved (EN 61000-6-2 and EN 63-2100)
Additionally, all Walbro FRB-Series Pumps Feature:
- Continuous Duty Life Over 18,000 Hours (Diesel Fuel)
- Weight of 1.83 lbs (0.83 Kg)
- Pump Cycles Only On Fuel Demand
- Replaceable Filter
FRB-2 Pump Specifications:
| Voltage: | 24vdc |
| Minimum Flow: | 43 gph (162 lph) |
| Deadhead Pressure: | 8.0 - 11.0 psi |
| Max Current Draw: | 2.3 amps |
| Life: | >18000 Hours |
| Dry Lift: | 48" |
| Inlet/Outlet: | 1/4-18 NPSF |
| Electrical Connector | Single Lead (Negative Grounded to Case), No Connector |
| Inlet Filter Screen: | 70 Micron |
| Corrosion Resistance: | 96 Hours Salt Spray Test (ATSM B-117) |
| Outlet Check Valve: | None |
**If your ADDRESS is RURAL please Add to Cart 1x Rural Delivery Fee to your order - This can be found at the bottom of the Drop Down Menu - 1 Fee covers Multiple Purchases**
incl. VAT, shipping costs apply
- Sold Out
Walbro FRB-5-2 Reciprocating Fuel Pump - 12v
The Walbro FRB-5 Industrial Fuel Pump is the single highest-flowing fuel pump in the FR Series. It flows a minimum of 45 gallons per hour against a pressure of eight to eleven PSI. This makes it an excellent choice for transfer pump applications requiring large fuel flow. This pump runs continuously at a constant rate when powered. It has a built-in fuel filter. The cover for the filter can be removed using a 19mm or 3/4-inch hex wrench on the nut on the bottom of the fuel bowl. The FRB-5 can be mounted either horizontally or vertically. This pump supersedes the Walbro 6065-1 Fuel Pump, which is discontinued.
All Walbro Marine and Industrial Fuel Pumps Feature:
- Low Current Draw
- Reverse-Polarity Protected up to 60 minutes
- Self-Priming (Dry Lift) of more than 48" (120 cm)
- Dry Run to Four Hours
- Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
- Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
- Protection from Transient Voltages to 100 vdc
- US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
- European CE Standard Approved (EN 61000-6-2 and EN 63-2100)
Additionally, all Walbro FRB-Series Pumps Feature:
- Continuous Duty Life Over 18,000 Hours (Diesel Fuel)
- Weight of 1.83 lbs (0.83 Kg)
- Pump Cycles Only On Fuel Demand
- Replaceable Filter
Walbro FRB5 Pump Specifications:
| Voltage: | 12vdc |
| Minimum Flow: | 45 gph |
| Deadhead Pressure: | 8.0 - 11.0 psi |
| Max Current Draw: | 2.3 amps |
| Life: | >18000 Hours |
| Dry Lift: | 48" |
| Inlet/Outlet: | 1/4-18 NPSF |
| Electrical Connector | Two Leads, No Connector |
| Inlet Filter Screen: | 70 Micron |
| Corrosion Resistance: | 96 Hours Salt Spray Test (ATSM B-117) |
| Outlet Check Valve: | None |
**If your ADDRESS is RURAL please Add to Cart 1x Rural Delivery Fee to your order - This can be found at the bottom of the Drop Down Menu - 1 Fee covers Multiple Purchases**
incl. VAT, shipping costs apply
- Sold Out
Choose by BRAND
